Dehumidifier Freezing Up: A Complete Guide

No Comments

Photo of author

By Shuvradeb

If your dehumidifier freezing up, the cold air is likely causing the water to turn to ice. This can happen if the dehumidifier isn’t placed in an area with proper ventilation or if the room is too cold. Dehumidifiers work best when the surrounding air temperature is between 60 and 90 degrees Fahrenheit.

Dehumidifier Freezing Up & Some Fix

The problem of a dehumidifier freezing up can be caused by several different factors. One possible cause is a clogged air filter, as the lack of airflow can decrease the temperature of the coils and cause the icing to occur.

Additionally, if the unit is not in an area with proper ventilation, it can’t take in enough warm air and will become too cold to operate correctly.

Finally, if the temperature setting is too low, the unit won’t be able to efficiently remove moisture from the air and may freeze up as a result.

Room Temperature Is Too Low (Coils Freeze Over)

When the temperature dips below 55 degrees, the coils in your heat pump begin to freeze over. This reduces the pump’s efficiency and can eventually lead to complete failure.

Dehumidifier Freezing Up

So if you want to keep your home warm and cozy all winter, keep the temperature above 55-65 degrees Fahrenheit. Otherwise, you might find yourself dealing with a case of frozen coils.

Blower Fan Or Fan Issue (Airflow Restriction Leading To Dehumidifier Freezing Up)

The cause of this problem is usually an airflow restriction, which several things can cause. One common culprit is the blower fan.

If the blades are dirty or obstructed, they can’t move air as effectively, leading to restricted airflow.

Another potential issue is the fan itself. If the motor is damaged or the blades bent, it can cause airflow problems.

Fortunately, you can do a few things to fix this issue. First, check the blower fan and clean or replace it if necessary. Second, check the fan for damage and replace it if necessary.

Faulty Humidity Icing Up Your Dehumidifier

The sensor can get covered in condensation in humid environments and freezes. This can cause the dehumidifier to shut off prematurely or run less efficiently.

Luckily, there are a few easy ways to fix this problem. First, try wiping down the sensor with a clean cloth.

You can recalibrate the sensor using a small screwdriver if that doesn’t work. Just be careful not to damage the sensor in the process.

With a bit of elbow grease, you should be able to get your dehumidifier up and running again in no time.

Dirty Filter

A filter is an essential part of any dehumidifier. It helps to trap dust, pollen, and other airborne particles, keeping them out of the air you breathe.

However, over time, filters can become clogged with dirt and debris. When this happens, airflow is restricted, causing the dehumidifier to work harder, eventually leading to ice buildup.

To prevent this, clean or replace your dehumidifier’s filter regularly. Doing so will ensure that your dehumidifier will continue working effectively for years.

[elementor-template id=”2495″]

How Does A Dehumidifier Work?

A dehumidifier works by drawing in humid air and cooling it down through an evaporator coil. As air passes over the cold coils, moisture condenses on the surface of the coil and is collected in a tank or tray beneath it.

The cooled, dry air is then circulated back into your home or office. By removing excess moisture from the air, dehumidifiers help improve your comfort level (especially during hot summer months) while also protecting against mold growth and damage to furniture, fabrics, and other household items caused by humidity.

Leave a Comment